Set de generación de energía electrónica Scania 240KW Scania
Información básica
Modelo: KH-240GF
Descripción del producto
| 1. Specification of genset | ||||||||
| Gensets Model | KH-240GF | |||||||
| Prime Power | 240KW/300KVA | |||||||
| Standby Power | 264KW/330KVA | |||||||
| Rated Voltage(V) | 380/220 | |||||||
| Rated Frequency(HZ) | 50 | |||||||
| Rated Speed (rpm) | 1500 | |||||||
| Power Factor(COS) | 0.8(lagging) | |||||||
| Prime Power(PRP):Prime power is available for an unlimited number of annual hours in variable load application,in accordance with GB/T2820-97;A 10% overload capability is available for a period of 1 hour within a 12-hour of operation. | ||||||||
| Standby Power Rating(ESP):The standby power rating is applicable for supplying emergency power for the duration of a utility power interruption.No overload,utility parallel or negotiated outage operation capability is available at this rating. | ||||||||
| 2. Specification of diesel engine | ||||||||
| Engine brand | Scania | |||||||
| Engine model | DC9 65A 10-95 | |||||||
| Number of Cylinders | 5 | |||||||
| Cylinder arrangement | Vertical in-line | |||||||
| Cycle | Four stroke | |||||||
| Aspiration | Turbocharged and Air/Air Cooling | |||||||
| Fuel System | Electronic Injection | |||||||
| Bore×Stroke (mm×mm) | 127x140 | |||||||
| Displacement (Liter) | 8.87 | |||||||
| Compression Ratio | 18.0:1 | |||||||
| Speed Governor | EMS | |||||||
| Cooling System | Forced Water Cooling Cycle | |||||||
| Overload capacity | 110% | |||||||
| Fuel Consumption at 100% Load (g/kwh) | 197 | |||||||
| Starting Method | DC24V electrical starting | |||||||
| 3. Specification of alternator | ||||||||
| Alternator brand | Stamford | |||||||
| Orgin | WuXi | |||||||
| Alternator model | HCI444D | |||||||
| Number of Phase | 3 | |||||||
| Connecting Type | 3 Phase and 4 Wires | |||||||
| Number of Bearing | 1 | |||||||
| Protection Grade | IP23 | |||||||
| Altitude | ≤1000m | |||||||
| Exciter Type | Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire | |||||||
| Insulation Class | H | |||||||
| Telephone Influence Factor (TIF) | ≤50 | |||||||
| THF | ≤2% | |||||||
| Voltage Regulation, Steady State | ≤±1% | |||||||
| Transient State Voltage | ≤-15%~+20% | |||||||
| 4. Specification of control Panel | ||||||||
| The control panel is AMF control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with low oil pressure,high water temperature,over speed,over load protection function. | ||||||||
| The features of control Panel: | ||||||||
| The control panel is a new generation Automatic control module for single Genset, which adopts bran-new outline configuration, focus on the requirements of customers, and perfectly improves the performance of controller. It fully meets the auto control requirements of different kinds of Genset for user or special assembly factory. | ||||||||
Grupos de Producto : Importación de generadores de Diesel marca > Sistemas de generador diesel accionados por Scania
