500kw conjunto generador paralelo doosan

Especificaciones 500kw doosan generador paralelo conjunto \ n1.manual / auto multi paralelo \ n2.auto seguimiento de frecuencia \ n3.short protección de circuito \ n \ n 500kw doosan generador paralelo conjunto: 1. Especificación de grupo electrógeno

Gensets model				KH-500GF
Prime power(KW)				500
Rated voltage(V)				400 / 230
Rated current(A)				902
Rated frequency(HZ)				50
Rated Speed (rpm)				1500
Power Factor				0.8(lagging)
Dimensions(mm) (L×W×H)				3600x1420x1700
Genset Weight(kg)				4200

2. Especificación del motor diesel

Engine brand				Doosan Daewoo
Engine model				P222LE-S
Air Intake System				Turbocharged, Air/Air Cooling
Fuel System				BOSCH P type fuel pump
Cycle				Four stroke
Cylinder Arrangement				12 in ”V”
Displacement				21.927L
Bore×Stroke (mm×mm)				128 x 142
Compression Ratio				14.6:1
Rated RPM				1500rpm
Cooling System				Forced Water Cooling Cycle
Max. Standby Power at Rated RPM				603KW
Governor Type				Electronic
Starting Method				DC24V electrical starting

3. Especificación del alternador

Alternator brand				Stamford
Alternator model				HCI544F-S
Excitation				Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire
Number of Phase				3
Connecting Type				3 Phase and 4 Wires
Number of Bearing				1
Power Factor				0.8
Protection Grade				IP23
Altitude				≤1000m
Insulation Class, Temperature Rise				H
Telephone Influence Factor (TIF)				≤50
THF				≤2%
Voltage Regulation, Steady State				≤±1%
Transient State Voltage				≤-15%~+20%

4. Especificación del gabinete paralelo (con el controlador DEIF)

The control cabinet is parallel cabinet, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with low oil pressure,high water temperature,over speed,over load protection function.

The application of DEIF controller:

The Basic Gen-set Controller is a micro-processor based control unit containing all necessary functions for protection of a gen-set and control of mains and generator breaker. It contains all necessary 3-phase measuring circuits and all values and alarms are presented on the LCD display.

The BGC is a compact all-in-one unit designed for the following applications:

1. Automatic mains failure (no back sync.)

2. Island operation

Optional applications:

3. Multiple gen-sets, load sharing

4. Peak shaving

5. Fixed power to mains

6. Automatic mains failure (back sync.)

The BGC automatically carries out a cyclical self-test at start-up. If any errors are found, they will be displayed in clear text in the display.

Grupos de Producto : Tipo especial de grupos electrógenos